to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
silicon transistor the m pa801t has built-in 2 low-voltage transistors which are designed to amplify low noise in the vhf band to the uhf band. features ? low noise nf = 1.2 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? high gain |s 21e | 2 = 9.0 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? a mini mold package adopted ? built-in 2 transistors (2 2sc4226) ordering information part number quantity packing style m pa801t loose products embossed tape 8 mm wide. pin 6 (q1 (50 pcs) base), pin 5 (q2 base), pin 4 (q2 emitter) face to perforation side of the tape. m pa801t-t1 taping products (3 kpcs/reel) remark if you require an evaluation sample, please contact an nec sales representative. (unit sample quantity is 50 pcs.) absolute maximum ratings (t a = 25 c) parameter symbol rating unit collector to base voltage v cbo 20 v collector to emitter voltage v ceo 12 v emitter to base voltage v ebo 3v collector current i c 100 ma total power dissipation p t 150 in 1 element mw 200 in 2 elements note junction temperature t j 150 ?c storage temperature t stg C65 to +150 ?c note 110 mw must not be exceeded in 1 element. m pa801t high-frequency low noise amplifier npn silicon epitaxial transistor (with built-in 6-pin 2 elements) mini mold pin configuration (top view) printed in japan document no. id-3635 (o.d. no. id-9142) date published april 1995 p 2.1?.1
1.25?.1
1 2 3 6 5 4 0.2 ? +0.1 0.65 0.65 1.3 2.0?.2 0.9?.1 0.7 0~0.1 0.15 ? +0.1 654 q 1 q 2 123 pin connections
1. collector (q1)
2. emitter (q1)
3. collector (q2)
4. emitter (q2)
5. base (q2)
6. base (q1)
xy package drawings (unit: mm) the information in this document is subject to change without notice. 1995 preliminary data sheet
m pa801t 2 electrical characteristics (t a = 25 c) parameter symbol condition min. typ. max. unit collector cutoff current i cbo v cb = 10 v, i e = 0 1 m a emitter cutoff current i ebo v eb = 1 v, i c = 0 1 m a dc current gain h fe v ce = 3 v, i c = 7 ma note 1 70 250 gain bandwidth product f t v ce = 3 v, i c = 7 ma 3.0 4.5 ghz feed-back capacitance c re v cb = 3 v, i e = 0, f = 1 mhz note 2 0.7 1.5 pf insertion power gain |s 21 | 2 v ce = 3 v, i c = 7 ma, f = 1 ghz 7 9 db noise figure nf v ce = 3 v, i c = 7 ma, f = 1 ghz 1.2 2.5 db h fe ratio h fe1 /h fe2 v ce = 3 v, i c = 7 ma 0.85 a smaller value among h fe of h fe 1 = q1, q2 a larger value among h fe of h fe 2 = q1, q2 notes 1. pulse measurement: pw 350 m s, duty cycle 2 % 2. measured with 3-pin bridge, emitter and case should be connected to guard pin of bridge. h fe classification rank fb gb marking r24 r25 h fe value 70 to 140 125 to 250 typical characteristics (t a = 25 c) 200 100 0 50 100 150 ambient temperature t a (?c) total power dissipation p t (mw) p t e t a characteristics 20 10 0 0.5 1.0 v ce = 3 v base to emitter voltage v be (v) collector current i c (ma) i c e v be characteristics 25 20 15 10 5 0 510 i c e v ce characteristics collector current i c (ma) collector to emitter voltage v ce (v) collector current i c (ma) 200 100 50 20 10 0.5 1 5 10 50 v ce = 3 v dc current gain h fe h fe e i c characteristics 80 a 40 a 20 a 60 a 2 elements in total per element i b = 160 a m 140 a m 120 a m 100 a m m m m m
m pa801t 3 6 4 2 0 0.5 1.0 5.0 10 50 100 v ce = 3 v
f = 1 gh z collector current i c (ma) noise figure (db) nf e i c characteristics 24 20 16 12 8 4 0 0.1 0.2 0.5 1.0 2.0 5.0 frequency f (gh z ) insertion power gain l s 21e l 2 (db) l s 21e l 2 e f characteristics v ce = 3v
i c = 7 ma feed-back capacitance c re (pf) 5.0 1.0 0.5 0.2 0.1 12 51020 50 f = 1 mh z c re e v cb characteristics collector to base voltage v cb (v) 2.0 15 10 5 0 0.5 1 5 10 50 100 insertion power gain l s 21e l 2 (db) collector current i c (ma) v ce = 3 v
f = 1.0 gh z l s 21e l 2 e i c characteristics 20
10
5
2
1
0.5 1 5 10 50 collector current i c (ma) f = 1.0 gh z v ce = 3 v gain bandwidth product f t (gh z ) f t e i c characteristics
m pa801t 4 s-parameters v ce = 3 v, i c = 7 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .750 e45.7 11.858 144.0 .035 63.3 .816 e28.5 200.00 .618 e84.9 10.093 122.3 .053 53.2 .609 e41.8 300.00 .528 e114.5 8.219 107.7 .064 50.6 .481 e46.7 400.00 .483 e134.3 6.684 97.9 .073 50.6 .411 e49.1 500.00 .459 e148.5 5.565 90.5 .081 50.7 .365 e50.5 600.00 .447 e158.8 4.737 84.6 .089 52.3 .337 e51.5 700.00 .441 e167.4 4.134 79.7 .098 53.5 .316 e52.6 800.00 .439 e174.4 3.653 75.2 .107 54.2 .300 e54.2 900.00 .437 179.2 3.283 71.1 .117 54.9 .290 e55.9 1000.00 .437 173.7 2.978 67.2 .126 55.6 .281 e57.9 1100.00 .440 168.6 2.732 63.7 .136 55.8 .275 e59.6 1200.00 .443 163.9 2.533 60.0 .147 55.3 .270 e62.3 1300.00 .444 159.6 2.357 56.6 .158 55.4 .267 e64.7 1400.00 .449 155.5 2.216 53.4 .169 55.3 .264 e67.5 1500.00 .450 151.6 2.077 50.3 .180 54.7 .259 e70.6 1600.00 .455 147.9 1.972 47.4 .192 54.5 .258 e73.3 1700.00 .459 144.3 1.868 44.3 .202 53.9 .256 e76.3 1800.00 .462 140.9 1.789 41.3 .214 53.0 .255 e79.6 1900.00 .466 137.5 1.702 38.4 .226 52.3 .253 e83.0 2000.00 .470 134.4 1.635 36.1 .238 51.5 .253 e86.4 v ce = 3 v, i c = 5 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .819 e38.9 8.934 148.0 .038 65.8 .868 e23.6 200.00 .701 e73.4 8.007 127.6 .060 53.1 .687 e36.7 300.00 .608 e102.3 6.898 112.6 .072 47.6 .560 e42.4 400.00 .549 e123.6 5.819 101.8 .079 45.2 .483 e45.4 500.00 .511 e139.6 4.970 93.5 .086 45.7 .434 e47.2 600.00 .494 e151.0 4.255 86.9 .093 46.5 .402 e48.6 700.00 .481 e160.8 3.750 81.4 .099 47.2 .379 e49.9 800.00 .475 e168.6 3.328 76.3 .107 48.9 .361 e51.5 900.00 .472 e175.7 3.004 72.0 .113 49.7 .350 e53.4 1000.00 .471 178.2 2.734 67.7 .122 50.9 .340 e55.4 1100.00 .473 172.8 2.522 64.0 .130 51.6 .332 e57.3 1200.00 .474 167.6 2.355 60.2 .139 52.3 .328 e59.7 1300.00 .474 162.9 2.176 56.7 .148 53.1 .322 e62.3 1400.00 .477 158.4 2.038 53.2 .158 53.3 .319 e65.2 1500.00 .481 154.4 1.921 49.8 .168 53.7 .315 e68.2 1600.00 .484 150.3 1.818 46.7 .177 53.3 .313 e70.9 1700.00 .489 146.5 1.726 43.9 .190 53.3 .312 e73.9 1800.00 .490 142.9 1.647 40.6 .200 53.0 .312 e77.2 1900.00 .495 139.3 1.578 37.6 .212 52.7 .309 e80.8 2000.00 .501 136.0 1.505 35.0 .223 52.0 .309 e84.0
m pa801t 5 s-parameters v ce = 3 v, i c = 3 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .899 e30.6 5.578 153.7 .042 69.0 .923 e17.3 200.00 .808 e60.6 5.327 134.4 .069 54.5 .793 e29.2 300.00 .723 e86.7 4.877 119.6 .084 46.0 .679 e35.4 400.00 .660 e108.2 4.341 108.1 .093 41.1 .604 e39.5 500.00 .610 e125.9 3.883 98.5 .098 38.8 .550 e42.0 600.00 .583 e138.6 3.388 90.9 .102 37.4 .513 e44.2 700.00 .560 e150.0 3.046 84.3 .106 37.8 .487 e45.9 800.00 .547 e159.4 2.741 78.5 .108 38.1 .468 e47.9 900.00 .538 e167.4 2.498 73.4 .112 39.5 .455 e49.9 1000.00 .535 e174.4 2.287 68.9 .116 41.0 .444 e52.3 1100.00 .534 179.3 2.111 64.6 .120 43.0 .435 e54.7 1200.00 .533 173.4 1.965 60.2 .125 45.1 .429 e57.2 1300.00 .533 168.3 1.830 56.3 .131 46.7 .424 e59.9 1400.00 .534 163.2 1.721 52.7 .139 48.3 .422 e62.8 1500.00 .538 158.7 1.620 49.2 .146 49.8 .417 e65.7 1600.00 .542 154.3 1.544 45.7 .155 51.3 .414 e68.8 1700.00 .545 150.0 1.464 42.7 .164 52.4 .415 e72.0 1800.00 .548 146.1 1.396 39.5 .174 53.0 .412 e75.3 1900.00 .552 142.0 1.336 36.6 .187 53.7 .411 e78.8 2000.00 .556 138.3 1.280 33.6 .199 54.1 .411 e82.3 v ce = 3 v, i c = 1 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .967 e22.9 1.935 159.9 .045 74.0 .978 e9.2 200.00 .930 e45.8 1.968 143.1 .083 60.1 .931 e17.4 300.00 .884 e67.1 1.938 129.1 .108 48.9 .870 e23.2 400.00 .842 e85.9 1.827 117.2 .125 39.4 .822 e28.0 500.00 .801 e103.1 1.748 106.7 .134 32.6 .779 e31.9 600.00 .771 e117.0 1.576 97.4 .137 27.1 .749 e35.3 700.00 .742 e130.0 1.498 89.2 .137 22.9 .722 e38.4 800.00 .722 e141.2 1.403 81.9 .134 20.0 .702 e41.3 900.00 .706 e151.1 1.326 75.6 .129 18.5 .690 e44.4 1000.00 .695 e159.9 1.242 69.6 .124 17.8 .680 e47.4 1100.00 .689 e167.7 1.169 64.5 .118 18.1 .671 e50.4 1200.00 .685 e174.9 1.102 59.6 .112 19.8 .666 e53.6 1300.00 .681 178.7 1.030 55.3 .106 23.5 .660 e56.9 1400.00 .681 172.6 .979 50.9 .103 28.0 .658 e60.4 1500.00 .683 166.8 .925 47.2 .100 33.6 .654 e64.0 1600.00 .684 161.4 .884 43.6 .102 40.4 .651 e67.6 1700.00 .684 156.1 .842 40.4 .107 47.5 .651 e71.5 1800.00 .686 151.4 .804 37.3 .115 53.5 .649 e75.1 1900.00 .689 146.6 .773 34.6 .127 57.9 .646 e79.2 2000.00 .690 142.1 .738 32.3 .141 62.1 .646 e83.0
m pa801t 6 [memo] no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or others. while nec corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quality grades: standard, special, and specific. the specific quality grade applies only to devices developed based on a customer designated quality assurance program for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. the quality grade of nec devices in standard unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those specified for standard quality grade, they should contact nec sales representative in advance. anti-radioactive design is not implemented in this product. m4 94.11
|
